Vacuum cleaner - How to replace the back wheels and hose connection

Çözüm

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

WARNING! RISK OF INJURY

Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE THE BACK WHEELS AND CONNECTOR NOZZLE

1 . With the help of a screwdriver, lift the clip and remove the screws.

2. To disconnect the wires, push the locking ring and pull of the wires.

3. Remove the front wheels, the brush roll release button, the hatch cover for brush roll and the brush roll

4. Disassemble the nozzle by removing the screws

5. Open it and the wheels support frame can be removed. Now it’s possible to remove the wheels and replace them if needed.

6. The connector nozzle is also possible to replace by sliding it out.

7. Do the steps in reverse order to assemble.